Resin shower tray in 90x70 sand finish Ultraflat S Ideal Standard

Rectangular shower tray made of resin in 90x70 sand finish model Ultraflat S Ideal Standard . The shower trays in the Ultraflat S collection can be customized with different colors to meet any space need. The height of the shower tray has been reduced to 3cm and they are resistant to damage caused by light. Ultaflat S is at the top of the DIN 51097 (Class C) standard, preventing slipping on surfaces with an inclination greater than 24º. These dishes are provided with bacteriostatic and fungicidal elements that inhibit the growth of fungi or bacteria on the surface of the dish, guaranteeing greater safety and hygiene. They are also subjected to rigorous resistance tests to chemicals and meet all the tests required by the En 14527 standard. They are provided with a cast marble core that is composed of natural minerals and resin covered by an opaque enamel. In case of scratches and scrapes, the chainring can be restored with a special repair kit. These Ultraflat S shower trays can be cut both lengthwise and width, being able to make cuts to adapt to space limitations, such as a column or corner. Made of a highly resistant material with a matte stone effect. It is available in five colors, white, sand, gray, mocha and black. The drain grate is made of stainless steel. The drain valve is not included (Ref .: K936367) these drains are supplied in chrome and are available in the same color as the plate to create an elegant combination. This shower tray can be installed on the floor or at ground level. The set of legs is not included (Ref .: K936467) for dishes up to 100cm, a single set is enough, but for measurements over 100cm, two are recommended.